- Use when adding an amp to a factory or aftermarket radio
- Provides an additional set of pre-amp outputs from a head unit equipped with only 1 set
- Linear from 20Hz - 10KHz at +/-0.5 dB, while maintaining signal phase
- Isolates input and output circuits to prevent ground loop noise
- Adjusts the signal from 2W - 40W per channel with signals below 20Hz cut-off
PAC SNI-35 Variable LOC Line Out Converter
The PAC Line Out Converter provides an additional set of pre-amp outputs from a head unit equipped with only 1 set. This Adjustable Line Out Converter is linear from 20Hz to 10KHz at +/-0.5 dB while maintaining signal phase. With the PAC SNI-35 2-Channel Line Out Converter, the input and output circuits are isolated to prevent ground loop noise. A PAC Line Out Converter can adjust the signal from 2W to 40W per channel with signals below 20Hz cut-off.
PAC SNI-35 Variable LOC Line Out Converter
- Use when adding an amp to a factory or aftermarket radio
- Provides an additional set of pre-amp outputs from a head unit equipped with only 1 set
- Linear from 20Hz - 10KHz at +/-0.5 dB, while maintaining signal phase
- Isolates input and output circuits to prevent ground loop noise
- Adjusts the signal from 2W - 40W per channel with signals below 20Hz cut-off
The PAC Line Out Converter provides an additional set of pre-amp outputs from a head unit equipped with only 1 set. This Adjustable Line Out Converter is linear from 20Hz to 10KHz at +/-0.5 dB while maintaining signal phase. With the PAC SNI-35 2-Channel Line Out Converter, the input and output circuits are isolated to prevent ground loop noise. A PAC Line Out Converter can adjust the signal from 2W to 40W per channel with signals below 20Hz cut-off.