Your Browsing History
NodeMCU Lua ESP8266 ESP-12F CP2102 wifi development board
- You may need the CP2102 driver available from the Silabs website. It is free and easy to install.
- This board features the ESP8266 ESP-12F but has all of its pins broken out. This enables the ESP8266 to be breadboard compatible. It also has an integrated micro-usb port which makes powering and programming the chip far easier compared to having to use a usb-to-serial adapter.
- The NodeMcu firmware can be loaded easily if you want to develop programs in Lua. It is also compatible when other leading micro-controller development platforms.
- This board has a female Micro-USB port on the board for power and program uploading. This port type is very common on many consumer electronics and on smartphones.
- Flashing this device is easy. To flash, just hold the flash button and perform the flash using firmware programming software.
Overview
Specs
Reviews
Any questions? Our AI beta will help you find out quickly.
Try me now
Uses CP2102
NodeMCU has built-in USB-TTL serial with reliable industrial strength CP2102
CP2102 provides superior stability on all supported platforms
Communication interface voltage: 3.3V
Antenna type: Built-in PCB antenna is available
Wireless 802.11 b/g/n standard
WiFi at 2.4GH z, support WPA / WPA2 security mode
Support STA/AP/STA + AP three operating modes
Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
D0 ~ D8,
SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
AD 0: 1 channel ADC
Power input: 4.5V ~ 9V (10VMAX), USB-powered
Current: continuous
transmission: 70mA (200mA MAX), Standby: <200uA
Logical current: 0mA-36mA
Transfer rate: 110-460800bps
Support UART / GPIO data communication interface
Support Smart Link Smart Networking
Working temperature: -40 Cel. ~ + 125 Cel.
Drive Type: Dual high-power H-bridge driver
ESP8266 has IO Pin
Don't need to download resetting
A great set of tools to develop ESP8266
Flash size: 4 MByte
NodeMCU has built-in USB-TTL serial with reliable industrial strength CP2102
CP2102 provides superior stability on all supported platforms
Communication interface voltage: 3.3V
Antenna type: Built-in PCB antenna is available
Wireless 802.11 b/g/n standard
WiFi at 2.4GH z, support WPA / WPA2 security mode
Support STA/AP/STA + AP three operating modes
Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
D0 ~ D8,
SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
AD 0: 1 channel ADC
Power input: 4.5V ~ 9V (10VMAX), USB-powered
Current: continuous
transmission: 70mA (200mA MAX), Standby: <200uA
Logical current: 0mA-36mA
Transfer rate: 110-460800bps
Support UART / GPIO data communication interface
Support Smart Link Smart Networking
Working temperature: -40 Cel. ~ + 125 Cel.
Drive Type: Dual high-power H-bridge driver
ESP8266 has IO Pin
Don't need to download resetting
A great set of tools to develop ESP8266
Flash size: 4 MByte
Warranty & Returns
Warranty, Returns, And Additional Information
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 30 days
- This item is covered by Newegg.com's 30-Day Return Policy.
- Read full return policy for details.
Manufacturer Contact Info
- Manufacturer Website
- Support Phone: 800-738-7120
- Support Email: [email protected]
- Support Website
- View other products from JacobsParts Inc.
LOADING...