Fluke 2AC VoltAlert AC non-contact electrical tester
The Pocket-Sized Voltage Detector
Always on for faster, safer voltage testing.
Your first-choice tool for go/no-go testing.
Tip glows and beeper sounds upon detection.
Fluke Electrical Testers
Known as go-to frontline troubleshooting tools by Electricians, Fluke Electrical Test Tools are designed for every application, from non-contact to contact voltage and continuity detection, open jaw current and motor phase rotation testing. Accurate, safe and easy to use.
Fluke 2AC Non-Contact Voltage Tester
The pocket-sized voltage detector
The Fluke 2AC VoltAlert AC non-contact voltage tester is designed to be pocket-sized & easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly. The 2AC tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house.
- Voltbeat technology and continuous self-test – so you always know it's working
- Upon detection, tip glows and beeper sounds
- CAT IV 1000 V for added protection
- Expanded range: 90 V AC to 1000 V AC
- Innovative 'Battery Check' ensures battery is in good condition
- Integrated clip design, optimized for pocket storage
The tip glows red and a beeper sounds when voltage is detected
- A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected
- Optionally, the beeper can be disabled for use in quiet environments
Continuous self-test so you always know it’s working
- When the tip blinks red you know it’s working properly
- Provides a continual visual indication that the 1AC II is on
90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use
- Wide voltage detection range allows for use in a broad range of applications
- Also available in a low voltage model from 20 V to 90 V AC for controls circuits
Safety features
- Rated to CAT IV 1000 V for added protection
- CE and CSA approved
Specifications: Fluke 2AC Non-Contact Voltage Tester
Fluke 2AC VoltAlert AC non-contact electrical tester
The Pocket-Sized Voltage Detector
Always on for faster, safer voltage testing.
Your first-choice tool for go/no-go testing.
Tip glows and beeper sounds upon detection.
Fluke 2AC Non-Contact Voltage Tester
Fluke Electrical Testers
Known as go-to frontline troubleshooting tools by Electricians, Fluke Electrical Test Tools are designed for every application, from non-contact to contact voltage and continuity detection, open jaw current and motor phase rotation testing. Accurate, safe and easy to use.
The pocket-sized voltage detector
The Fluke 2AC VoltAlert AC non-contact voltage tester is designed to be pocket-sized & easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly. The 2AC tests for energized circuits and defective grounds, whether it's for an electrician on the factory floor or the do-it-yourselfer around the house.
- Voltbeat technology and continuous self-test – so you always know it's working
- Upon detection, tip glows and beeper sounds
- CAT IV 1000 V for added protection
- Expanded range: 90 V AC to 1000 V AC
- Innovative 'Battery Check' ensures battery is in good condition
- Integrated clip design, optimized for pocket storage
The tip glows red and a beeper sounds when voltage is detected
- A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected
- Optionally, the beeper can be disabled for use in quiet environments
Continuous self-test so you always know it’s working
- When the tip blinks red you know it’s working properly
- Provides a continual visual indication that the 1AC II is on
90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use
- Wide voltage detection range allows for use in a broad range of applications
- Also available in a low voltage model from 20 V to 90 V AC for controls circuits
Safety features
- Rated to CAT IV 1000 V for added protection
- CE and CSA approved
Specifications: Fluke 2AC Non-Contact Voltage Tester
| Safety Compliance | Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2; No. 61010-1-04, and ISA-82.02.01 Pollution Degree 2 |
| Operating | 90 V AC to 1000 V AC, CAT IV 1000 V rated |
| Operating Temperature | -10°C to 50°C (-14°F to 122°F) |
| Altitude | 2000 m (CAT IV 1000 V) |
| Battery | Typical battery life of greater than one year |