AWBLIN
Professional Automotive Test light
About us
With over 7 years of experience in the automotive tools field, AWBLIN focuses on building influential brands and products in the automotive parts industry.
Aiming to provide customers worldwide with high-quality automotive diagnostic test probes, battery switches and replacement parts tools.
Best Sellers from AWBLIN
Automotive Circuit Tester
Power Probe Kit
Battery Disconnect Switch
Specification:
? Two Clip Supply voltage: 5-36VDC
? Probe test Voltage Range: 1-60VDC
? Probe test DC Current Range: DC 0-8A.
? Resolution: 0.1V/0.1A
? Voltage Accuracy:±(1%+3digitals)
? Current Accuracy: ±(2%+2digitals)
? Operating Temperature: 0-50º
? Operating Humidity: <80%
- Overload Warning
- In voltage mode, the Tester will display overvoltage warning when voltage exceeds 61VDC. The LCD will display “OL”, Red LED light on.
- In current mode, If the current is too high, the LCD will display OL, buzzer alarm.
- WARNING:
- The tester power supply voltage between 5 to 36VDC, and the probe test voltage from 1 to 60VDC.
- Do not use the tester for all AC voltage supplies or AC voltage test.
- The tester is used only when the power supply is less than 36VDC and the test voltage is less than 60VDC.
- Self Check
- Polarity Detection: Fast identification of positive and negative polarity, and open circuit.
- Continuity Test: Quick detect for continuity of switches, relays, etc.
- Test Components (Components Before Installation), Testing Components (Online Testing): Use the “power switch”, components can be activated by using positive/ground terminals, which can quickly locate faulty components or wiring problems.
- USE As Short Wire:The large grounded crocodile black clip in the tester and the auxiliary small black grounded crocodile clip are physically fixed connections. The user can disconnect from the original line connection (such as control switch or open circuit) and use the two black clips on the tester as connections for testing and maintenance (leaving the red clip disconnected from the vehicle’s battery).
- Check the Faulty Grounding: Instant detection of bad grounding, no need to waste the fuse, can trace and locate the break point.
- MODE BUTTON: Press the “mode button” to switch voltage mode or current mode.
- POWER SWITCH:
- Press the “power switch” to position ( – ). The indicator LED light on the tester is red, indicating that the probe outputs positive voltage and the LCD displays the current battery voltage.
- Press the “power switch” to position (=). The indicator LED light on the tester is green, indicating that the probe outputs negative voltage, the LCD displays , and the buzzer alarms.
- EXTENDED SPRING WIRE: 196.85 inches
- PROBE: Stainless Steel
Specification:
? Two Clip Supply voltage: 5-36VDC
? Probe test Voltage Range: 1-60VDC
? Probe test DC Current Range: DC 0-8A.
? Resolution: 0.1V/0.1A
? Voltage Accuracy:±(1%+3digitals)
? Current Accuracy: ±(2%+2digitals)
? Operating Temperature: 0-50º
? Operating Humidity: <80%
- Overload Warning
- In voltage mode, the Tester will display overvoltage warning when voltage exceeds 61VDC. The LCD will display “OL”, Red LED light on.
- In current mode, If the current is too high, the LCD will display OL, buzzer alarm.
- WARNING:
- The tester power supply voltage between 5 to 36VDC, and the probe test voltage from 1 to 60VDC.
- Do not use the tester for all AC voltage supplies or AC voltage test.
- The tester is used only when the power supply is less than 36VDC and the test voltage is less than 60VDC.
- Self Check
- Polarity Detection: Fast identification of positive and negative polarity, and open circuit.
- Continuity Test: Quick detect for continuity of switches, relays, etc.
- Test Components (Components Before Installation), Testing Components (Online Testing): Use the “power switch”, components can be activated by using positive/ground terminals, which can quickly locate faulty components or wiring problems.
- USE As Short Wire:The large grounded crocodile black clip in the tester and the auxiliary small black grounded crocodile clip are physically fixed connections. The user can disconnect from the original line connection (such as control switch or open circuit) and use the two black clips on the tester as connections for testing and maintenance (leaving the red clip disconnected from the vehicle’s battery).
- Check the Faulty Grounding: Instant detection of bad grounding, no need to waste the fuse, can trace and locate the break point.
- MODE BUTTON: Press the “mode button” to switch voltage mode or current mode.
- POWER SWITCH:
- Press the “power switch” to position ( – ). The indicator LED light on the tester is red, indicating that the probe outputs positive voltage and the LCD displays the current battery voltage.
- Press the “power switch” to position (=). The indicator LED light on the tester is green, indicating that the probe outputs negative voltage, the LCD displays , and the buzzer alarms.
- EXTENDED SPRING WIRE: 196.85 inches
- PROBE: Stainless Steel
AWBLIN
Professional Automotive Test light
About us
With over 7 years of experience in the automotive tools field, AWBLIN focuses on building influential brands and products in the automotive parts industry.
Aiming to provide customers worldwide with high-quality automotive diagnostic test probes, battery switches and replacement parts tools.
Best Sellers from AWBLIN
Automotive Circuit Tester
Power Probe Kit
Battery Disconnect Switch