35M OM4 ST ST Fiber Optic Cable | Bend Insensitive Plenum 100Gb Duplex 50/125 ST to ST Multimode Jumper 35 Meter (114.82ft) | Length Options: 0.5M-300M | 10/100g sfp 100gb mm ofnp

This OM4 ST to ST fiber cable measures 35 meters (114.82 feet) and is a bend insensitive, 100Gb, duplex, laser optimized multimode fiber jumper cord. It features a Corning 50/125 optical fiber core and cladding, with stainless steel ST fiber optic connectors. This high bandwidth fiber enables high speed, low loss data transmission. The black jacketed jumper uses a zip-cord design and is suitable for education, corporate, military/defense, government, healthcare, finance and commercial, and computer networking applications. The fiber patch cable details are: 35 Meter (114.82 feet), Laser Optimized, Aqua, MMF Zip-Cord Reinforced, Multimode ST to ST Fiber Optic Patch Cable, Fiber Jumper Cord. The core and cladding consist of a Corning 50µm (micron) diameter fiber core and a 125µm diameter cladding (1 micron is 1 one-millionth of a meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core via total internal reflection, causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber by bouncing off the boundary between the core and cladding. Optical modality details for OM4 Ethernet over multimode fiber are: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Base-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) | 100Gb Ethernet 100GBase-SR10 150m. The fiber network bandwidth is 3600/500 MHz-km @850/1300 nm (OM4 - Optimized for 850nm VCSELs / higher speed)