VEVARUN Wireless XLR Transmitter and Receiver
Adopts Multiple Core Technologies:
This wireless xlr transmitter receiver adopts a highly integrated chip design and ID code pairing authentication. Uses UHF band for high interference immunity and stability. With 24-bit/48kHz smapling rate and >90dB signal-to-noise ratio to restore every detail of the sound and provide premium clear sound.
Specification:
Frequency range:530-590MHz. Adjustable channel: 30 adjustable frequency points. Channel spacing: 0.5-2.5MHz. Modulation method: DQPSK. Frequency stability: ±3PPM. Frequency Response: 40Hz-20KHz. Working range: 164ft-262ft. Signal-to-noise ratio: 90dB.
1200mAh Lithium Battery:
Working voltage: built-in 3.7V, 1200mAh lithium battery, 2 hours charging time and 8-9 hours working time.
There's a battery level indicator light on the LCD screen: when all three battery level lights are on, it indicates that the battery is fully charged; When the battery level flashes, it indicates low voltage, and the battery level is only10%, requiring charging.
Universal Compatibility:
Please Note: There are 3 swithing modes. After turning on the device, long press the VOL+ for 3 seconds to switch modes, when the signal indicator light is no on, the working voltage is 0V; Then continue to long press the VOL+ for 3 seconds, when the signal indicator light is always on, the working voltage is 5V; and then continue to long press the VOL+ for 3 seconds, when the signal indicator light is flashes, the working voltage is 48V. Be sure to switch it to 48V working voltage when you use a condenser microphone.
Also can be switched to AUX mode with two 6.35mm adapters for use with other sources such as guitars, mixers, PA systems and DJ consoles.
Wide Application:
Our this xlr wireless transmitter and receiver is perfect for conferences, live shows, streaming, studio recording, meetings, live interviews,weddings, band performances,vocal concert, stage performances, home karaoke, street performance and more.
VEVARUN Wireless XLR Transmitter and Receiver
Adopts Multiple Core Technologies:
This wireless xlr transmitter receiver adopts a highly integrated chip design and ID code pairing authentication. Uses UHF band for high interference immunity and stability. With 24-bit/48kHz smapling rate and >90dB signal-to-noise ratio to restore every detail of the sound and provide premium clear sound.
Specification:
Frequency range:530-590MHz. Adjustable channel: 30 adjustable frequency points. Channel spacing: 0.5-2.5MHz. Modulation method: DQPSK. Frequency stability: ±3PPM. Frequency Response: 40Hz-20KHz. Working range: 164ft-262ft. Signal-to-noise ratio: 90dB.
1200mAh Lithium Battery:
Working voltage: built-in 3.7V, 1200mAh lithium battery, 2 hours charging time and 8-9 hours working time.
There's a battery level indicator light on the LCD screen: when all three battery level lights are on, it indicates that the battery is fully charged; When the battery level flashes, it indicates low voltage, and the battery level is only10%, requiring charging.
Universal Compatibility:
Please Note: There are 3 swithing modes. After turning on the device, long press the VOL+ for 3 seconds to switch modes, when the signal indicator light is no on, the working voltage is 0V; Then continue to long press the VOL+ for 3 seconds, when the signal indicator light is always on, the working voltage is 5V; and then continue to long press the VOL+ for 3 seconds, when the signal indicator light is flashes, the working voltage is 48V. Be sure to switch it to 48V working voltage when you use a condenser microphone.
Also can be switched to AUX mode with two 6.35mm adapters for use with other sources such as guitars, mixers, PA systems and DJ consoles.
Wide Application:
Our this xlr wireless transmitter and receiver is perfect for conferences, live shows, streaming, studio recording, meetings, live interviews,weddings, band performances,vocal concert, stage performances, home karaoke, street performance and more.