MiiElAOD Banana Pi OpenWrtOne Router

OpenWrtOne is a device based on the Filogic 820 SoC that has WiFi 6, dual-band, 3×3/2×2, 1 x 2.5Gbit WAN, 1 x 1Gbit LAN, 1GB DDR4 RAM, 256 MiB NAND, 16 MiB NOR, M.2 SSD and USB 2.0.
OpenWrtOne uses MT7981B SoC with a dual-arm Cortex-a53 core at 1.3 GHz, 1 GB DDR4 RAM and 256 MiB SPI NAND storage. It also integrates 16 MiB of additional protected storage as a system backup, dual storage hardware to ensure that the onboard system is unbrickable, and finally integrated M.2. 2230/2242 NVMe PCIe 2 X1 ports can be used to add external storage. And with a battery holder for an internal clock, OpenWrt One offers a USB 2.0 Type-A and a mikroBUS expansion port to provide more interfaces to a host of technical possibilities.
SoCMT7981B (Filogic 820) dual-core Cortex-A53 processor @1.3 GHzSystem Memory1GB DDR4Storage256 MB SPI NAND flash for U-boot and Linux /16 MB SPI NOR flash for write-protected (by default) recovery bootloader (reflashing can be enabled with a jumper)/M.2 2242/2230 socket for NVMe SSD (PCIe gen 2 x1)Networking1 x 2.5GbE RJ45 port/ 1 x Gigabit Ethernet RJ45 port/ Dual-band WiFI 6 via MediaTek MT7976C (2×2 2.4 GHz + 3×3/2×2 + zero-wait DFS 5Ghz)/ 3x MMCX antenna connectorsUSB1x USB 2.0 Type-A host port/ USB Type-C (device, console) port using Holtek HT42B534-2 UART to USB chipExpansionMikroBUS socket for expansion modulesDebuggingConsole via USB-C port or 3-pin header, 10-pin JTAG/SWD header for main SoCRTCsupport RTC onboardMiscReset and User buttons/ Boot select switch: NAND (regular) or NOR (recovery)/ 2x PWM LEDs, 2x Ethernet LED (GPIO driven)/ EM6324 External hardware watchdog/ PCF8563TS (I2C) RTC with battery backup holder for CR1220 coin-cellPower Supply15V USB-PD on USB-C port / Optional 802.3at/af PoE via RT5040 moduleDimensions148 x 100.5 mm compatible with Banana Pi BPI-R4 case designCertificationsFCC/EC/RoHS compliance OpenWrtOne Introduction HardWare Specification of OpenWrtOne