PrimoChill Vue Pre-Mix (32oz) - Crimson

FULL DISCLOSURE AND IMPORTANCE IN PREPPRIMOCHILL VUE IS A SHOW COOLANT FIRST
PrimoChill has gone to great lengths to make Vue as easy to use as possible, but please keep in mind that it is for EXPERIENCED USERS looking for that extra aesthetic and requires more attention and maintenance and any other coolant Adding Vue to the system also requires more work than just pouring it in, but a spotless loop and ZERO air inductions during filling the system will make for less overall headaches.
Vue has a HIGH attraction to dyes. It's possible that it may leach old dyes out of components that had previously dyed coolants ran through them (radiators in particular). No amount of flushing with water will remove all previous dyes. This may result in Vue changing color slightly. For best results flush your system with PrimoChill System ReBoot prior to using VUE in existing systems that contained dyed coolant.
Sys Reboot is for loops that have seen coolant before dyed or not dyed. Reboot is effective at removing previous dyes from the loop, especially from the radiator. It also works very well on neutralizing some coolant additives that are left behind from previous coolants. Reboot also has properties to help set up a barrier for corrosion as well as microbes, eliminating the need for Sysprep.
FeaturesWater Based & Ecologically SoundHandmade in Small Batches Unmatched Quality ControlFluid with a Visual Indicator Microbial Growth CombatantStep 1 - PreppingIf your system is brand new we recommend using both Rad Clean and Sys Prep. If you have existing system, utilize our Rad clean and then move to step 2.
Step 2 - Cleaning old fluid out System Reboot was created to pull old dyes and fluid out of existing PC builds. This is essential to use if you had any other previous fluids in your build that you plan to use Vue in.
Step 3 - Final Prep and ProtectionPrimo Prep was created with Vue in mind. It has protective properties that help with both your Vue lasting longer and it's ability to keep the same color throughout it's duration.
Step 4 - Add your final VueAfter going through all the proper prepping (follow our guide) you're ready to add your Vue!



VUE FILLING GUIDE PrimoPrep was created with Vue in mind and should always be used when using Vue. The pre-treatment helps control the fluctuation of the PH levels in your system caused by high levels of copper typically due to large capacity radiators.With this treatment, it also prepares the system for use of coolants in a mix metal closed-loop environment leaving the guesswork a thing of the past. This is a MANDATORY prep if not your Vue will FAIL.
Slowly add the prep fluid to your loop and avoid letting air into the system to prevent bubbles from slowing down the process. The more bubbles the more flushes are needed. Fill the reservoir, cycling the pump and repeating the process until the loop is full. is normally the best practice, for prep and