Displayport KVM Switch 2 Monitors 2 Computers 8K@30Hz 4K@144Hz, USB 3.0 Dual Monitor KVM Switches Displayport 1.4 2 in 2 Out with 4 USB 3.0 Port for USB Device,Wired Remote and 4 Cable Included

8K displayport Dual Monitor KVM Switch, 2 computers share 2 monitors and 4 USB 3.0 devices.

Advantages:

2 computers share one set of wired/wireless keyboard, mouse and 2 monitors.

Dual monitors output support extended and mirror display.

Support max up resolution 8K@30Hz, 4K@144Hz, 2560×1440@144Hz, 1920x1080P@144Hz, downward compatible. support ultra-wide monitors.

Switching modes: Button switch and wired remote ( 1.5 m), switch between 2 computers just need 2-4 seconds, fast and convenient.

Support wired or wireless keyboard and mouse. When use a mechanical gaming keyboard, You need to plug in the DC 5V USB power cable to the KVM to provide sufficient power.

Cross support most major OS including Windows, Linux, Mac OS.

Dual displayport KVM switch with 4 USB 3.0 ports for USB devices.

Important tips:

For laptops, this KVM switch dual displayport supports USB C docking stations, but the resolution refresh rate may be limited by the docking station, and you may need to connect DC 5V to power the KVM (depending on your docking station).

The two monitors can only output the video source from one computer (mirror mode or expansion mode), and cannot output the signal source of PC1 and PC2 at the same time.

The cables(2*DP cable+1*USB cable)connecting PC 1 and PC 2 to the KVM cannot be cross-connected

The input USB 3.0 ports must be connected, otherwise the output USB devices will not be recognized. because the USB cables not only supply power to the KVM, but also transmits data between the computer and the USB devices.