LED Solar Street Lights 9900000lm Security Flood Lamp Motion Sensor Outdoor Wall

Features:
1. Split design: Our arc solar lamp separates the solar panel from the main lamp body. As long as the solar panel of our arc solar splitter is installed in a sunny place, the 5M-long cable can install the LED panel anywhere, even if there is no sunlight.
2. Wider lighting: The solar lamp is upgraded to 234 super bright LED beads and a wider 5.5V 1.5W polycrystalline silicon solar panel, which can bring 600lm of high brightness lighting.
3.3 Three modes are available: the button switch controls the operation of the three modes, and changes the function in turn with each press. 

Mode 1: the light turn on 100% brightness when detected, and turn off after 20 seconds when the person leaves ; 

Mode 2: The darkness is automatically lit. The light is 100% brightness during detection, and 30% brightness is always on 20 seconds after the person leaves; Mode 3: no detection, 50% brightness automatically lights up all night, and automatically goes out at dawn.
4. IP65 waterproof: Our solar lamp is made of high-quality ABS+PC material, suitable for all outdoor extreme weather, waterproof, dust-proof, heat-proof and frost-proof.
5. Easy to install: This outdoor solar safety lamp can be installed in two ways, with or without extension cable, to better meet your lighting needs. There is no need for complicated wiring, just use the attached screws to fix the solar sports lamp to any external wall.


Specification:
Power Source: Solar
Is Bulbs Included: Yes
Style: Modern Style
Model Number: Wall Lamp

Solar panel: 5.5V 1.5W
Light source: 2835 * 234LED
Battery: 1-8-6-5-0
Waterproof grade: IP65
Certification: CE, FCC, ROHS, IP65,
Test report: battery MSDS test report, UL UN38.3 test report

Installation Guide

1. Please check the light works normally or not. Place the solar panel face down and press the Mode button. lf the light blinks and turns on, it is working correctly.

2. Select the mode by covering the solar panel with your palm and pressing the Power button.(NOTE: Solar Light auto on at night, auto off during the day)

Mode 1(Recommended): Sensor light mode.Click Power button the first time.(Light off when there is no movement, full brightness when motion is detected)

Mode 2: Dim brightness sensor mode.Click Power button the second time.(Dim brightness when there is no movement, full brightness when motion isdetected)

Mode 3: Dim brightness.Click Power button the third time.(The light will remain at dim brightness always)

Mode set in cycle (Mode1-Mode2-Mode3-off)

3. Install the light on desired location.(Try to pick the spot where solar panel will get sufficient direct sunlight throughout the day)

Attentions

1. For maximum battery capacity, it is recommended that the solar sensor light be charged by direct sunlight for at least eight hours before initial use.

2. To ensure proper functioning of the light detector, please install it away from other light sources.

3. lf the battery is completely discharged, the solar lamp may not light up after a short charge or on cloudy days. In this case, the solar lamp must be exposed to direct sunlight for at least 2-3 days to restart.

4. Do not dispose of batteries in a fire.

5. Batteries should be recycled or disposed of according to state and local guidelines.

Packages: 
1 x Wall Lamp
1 x Solar Panels
1 x Installation Package