FYSETC 3D Printing Build Surface Double Sided Textured Pei Spring Powder Coated Steel Sheet Flexiable Build Plate 300 x 300mm for 3D Printer TAZ 6

Upgrade Spring Steel Sheet: Compatible with 300mm x 300mm hot bed/build plate, TAZ Workhorse, TAZ Pro, TAZ 6, TAZ 5, TAZ 4, TAZ 3, may fit A8 plus, et5 and et5 pro.!!! Please measure your bed, not rely on build volume/printing size which is about 5-10mm smaller than the heatbed.
Size: 300mm x 300mm/ 11.8 * 11.8 inch. It' s a stainless steel plate with double-sides special coating (PEI), which makes the bottom of the model show a textured mattle finish.
Two-in-one type of PEI powder coated hardended steel spring sheet, not easy to get desformed. It behaves as most PEI sheets would and works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they will wash off with water after use.
Easy to install, take off the back paper on the magletic base, stick it to the heated bed, then align the steel plate on it. The model can be easily removed by bending the plate when the bed temp cools down. It is possible to add inductive Z probes and add ABL printers for certain objects that need to be upgraded.
To clean, use some isopropyl alcohl after each use to keep contaminants away. If you ever need to restore adhesion, use very fine sandpaper 600 or higher and pass lightly, then clean with alcohol. For PLA and PETG we recommend 70° C bed temperature.