2-Pack 10dBi 5G 4G LTE Antenna with Magnetic Base TS9 Dual MIMO External Antenna for Netgear Nighthawk M6 MR6110 MR6500 M5 MR5100 M1 MR1100 LB1120 LB2120 Huawei MiFi Hotspots Router 5ft Cable

1. MAGNETIC SUCTION CUP BASE DUAL HOLDING POWER FOR ANY SURFACE Each antenna features a magnetic suction cup base that combines powerful magnet attraction with vacuum suction technology. This dual-mechanism design securely attaches to: Metal surfaces Magnets provide strong, instant grip Glass windows Suction cup creates vacuum seal on smooth surfaces RVs, boats, cars, metal cabinets, office windows Works on virtually any surface No drilling, no toolsjust press to mount. The soft PVC material protects your vehicle's paintwork.
2. 10DBI HIGH GAIN DRAMATICALLY BOOST YOUR 4G/5G SIGNAL Experience up to 10dBi high gain performancesignificantly stronger than standard 2-3dBi internal antennas found on most hotspots. This translates to extended cellular coverage, reduced dropped connections, and improved signal penetration through walls and obstacles. Frequency range covers 600-6000MHz, fully compatible with 5G, 4G LTE, 3G networks.
3. 2X2 MIMO TECHNOLOGY FASTER SPEEDS & STABLE CONNECTION The dual-antenna configuration supports 2x2 MIMO (Multiple Input Multiple Output) technology, allowing simultaneous data transmission and reception on multiple spatial streams. This delivers faster download/upload speeds, lower latency, and more stable connections even in congested network environments.
4. UNIVERSAL TS9 COMPATIBILITY PLUG & PLAY Features standard TS9 male connectors, compatible with virtually all devices with TS9 external antenna ports. Compatible models include : Netgear Nighthawk M6 / M6 Pro (MR6110, MR6150, MR6500) Netgear Nighthawk M5 (MR5100, MR5200) Netgear Nighthawk M1 (MR1100) Netgear LB1120, LB1121, LB2120 (LTE modems) Huawei MiFi hotspots, ZTE hotspots, and more
5. OMNIDIRECTIONAL 360° COVERAGE NO AIMING NEEDED Built with omnidirectional radiation pattern, these antennas capture cellular signals from all directions simultaneously. Unlike directional antennas that require precise aiming toward cell towers, our omni-design works perfectly regardless of your orientationideal for mobile applications like RVs, boats, or vehicles where direction constantly changes.
6. WEATHER-RESISTANT DESIGN INDOOR & OUTDOOR READY Rugged construction ensures reliable performance in various environments. The magnetic suction cup base maintains strong adhesion on clean surfaces. Operating temperature range: -20°C to +80°C.
7. INSTALLATION NOTE For best MIMO performance, position the two antennas at least 20 inches (50cm) apart. Clean the mounting surface thoroughly before attachingboth suction and magnet work best on clean surfaces. The base can be removed by lifting the edge of the suction cup to release the vacuum. Ensure TS9 connectors are fully seated but do not overtighten.

Are you tired of slow cellular speeds, dropped connections, and dead zones while traveling in your RV, boat, or working from a remote location? The 2-Pack 10dBi 5G/4G LTE Magnetic Suction Cup Base Antenna Set is engineered to dramatically improve your cellular signal with a unique tool-free mounting solution.

Traditional external antennas require permanent drilling or complex mounting. Our innovative magnetic suction cup base combines two powerful holding mechanisms:

1. Magnetic Force Strong neodymium magnets grip metal surfaces instantly
2. Suction Vacuum Creates an air-tight seal on glass and smooth surfaces

This dual-mechanism design allows you to mount on:

1. RV windows Improve signal while parked at campgrounds
2. Metal roofs/panels Magnets provide secure attachment
3. Boat cabins Stay connected while on the water
4. Car windows Boost hotspot signal during road trips
5. Office windows Enhance rural/remote office connectivity

No tools, no permanent modificationsjust press, connect, and enjoy stronger signal wherever you go. To remove, simply lift the edge of the suction cup to release the vacuum.

Traditional single-antenna setups suffer from signal reflections and interference (multipath fading). 2x2 MIMO uses two antennas to transmit and receive data simultaneously, effectively creating two "data pipes" between your device and the cell tower.

The result:

1. Faster throughput Higher download/upload speeds
2. Lower latency Reduced lag for video calls and gaming
3. More stability Better performance in congested or signal-reflective environments

This antenna set works with virtually any device equipped with TS9 female ports:

Netgear Nighthawk Series:

1. Nighthawk M6 / M6 Pro (MR6110, MR6150, MR6500)
2. Nighthawk M5 (MR5100, MR5200)
3. Nighthawk M1 (MR1100)
4. Nighthawk M2 (MR2100)

Netgear LTE Modems:

1. LB1120, LB1121, LB2120

Huawei MiFi Hotspots:

1. E8372, E5787, E5786, E5785, E5776, E5577, E5377

ZTE Hotspots:

1. MF980, MF971V, MF970, MF93E, MF93D, MF910, MF90

Verizon Jetpack:

1. 8800L, 7730L, 6620L, AC791L

Other compatible devices: AT&T Velocity 2, Inseego MiFi 8000/8800L, Sierra Wireless modems, and most cellular routers with TS9 ports.

Step 1: Clean Mounting Surface Thoroughly clean the glass, metal, or smooth surface where you plan to mount the antenna. The magnetic suction cup requires a clean, dry surface for optimal adhesion.

Step 2: Attach Antennas Press the magnetic suction cup base firmly onto the surface. The magnet will instantly grip metal surfaces, while the suction cup creates a vacuum seal on glass and smooth surfaces.

Step 3: Connect to Hotspot Screw the TS9 male connector onto your device's TS9 female port. Position antennas at least 20 inches (50cm) apart for optimal MIMO performance.

Step 4: Route Cables Use the 5ft/1.5m low-loss cables to route antennas to the optimal locationtypically outdoors or near a window. Avoid sharp bends within 2 inches of the connector.

Step 5: Test and Adjust Run a speed test before and after installation. Adjust antenna positions to maximize signal strength.

Step 6: Removal To remove the base, simply lift the edge of the suction cup to allow air to fill the vacuumno prying or tools needed.

1. Surface Preparation: For best adhesion, clean the mounting surface with alcohol wipes and allow to dry completely before installation.
2. Dual Holding Power: The magnetic suction cup works on both metal (magnets) and glass/smooth surfaces (suction).
3. MIMO Placement: Placing antennas too close together (<20cm) reduces MIMO effectiveness. Maintain separation for best results.
4. 5G Compatibility: While the antenna supports 5G frequency bands (up to 6000MHz), actual 5G performance depends on your device, carrier, and local 5G deployment.
5. Cable Management: Do not bend the cable sharply near the connector to prevent internal damage.
6. Removal: To remove, lift the edge of the suction cupdo not pull on the antenna or cable.