2-Pack 10dBi Dual Band WiFi Antenna 2.4GHz/5GHz RP-SMA Male High Gain Omnidirectional for Wireless Router, PCIe Network Card, USB Adapter, IP Camera, WiFi 6 Router (AX1800/AX3200/AX5400/AX11000)

1. 10DBI HIGH GAIN DRAMATICALLY EXTEND YOUR WIRELESS COVERAGE Experience up to 10dBi high gain performance significantly stronger than standard 2-3dBi antennas found on most routers and network cards. Users report clear throughput and RSSI gains on 2.4 GHz, with measurable range improvements in open environments. The 10dBi gain considerably extends effective range and raises link margins for both 2.4GHz and 5GHz bands. Perfect for eliminating dead zones, improving wall penetration, and achieving more reliable connections throughout your home or office.
2. RP-SMA MALE CONNECTOR UNIVERSAL COMPATIBILITY Features standard RP-SMA Male (Center Hole) connectors, compatible with thousands of devices that have RP-SMA Female ports. Works with ASUS, TP-Link, Netgear routers, PCIe WiFi 6 network cards (AX1800/AX3200/AX5400/AX11000), USB WiFi adapters, IP security cameras, and more. Please verify your device has RP-SMA Female ports before ordering. The machined RP-SMA male connector ensures easy swap-in upgrades.
3. OMNIDIRECTIONAL 360° COVERAGE NO AIMING REQUIRED Built with an omnidirectional radiation pattern that captures and transmits signals from all directions simultaneously. The antenna's 360° azimuth pattern favors horizontal reach, providing consistent coverage across a single floor or open area without needing to aim the element. Unlike directional antennas that require precise aiming, our omni-design works perfectly regardless of device orientation ideal for routers, desktop PCs, cameras, and mesh systems.
4. EASY PLUG-AND-PLAY UPGRADE NO DRIVERS REQUIRED Installation takes seconds: simply unscrew your existing antennas and screw on these RP-SMA Male connectors onto your devices RP-SMA Female ports. Hand-tighten only do not use tools. The omni dipole retains 360° radiation while increasing gain, so you improve link margin and reduce retransmits. The VSWR < 1.5 and 50 impedance design converts gain into usable signal rather than reflections.
5. DURABLE CONSTRUCTION WEATHER-RESISTANT Built with high-quality materials and gold-plated RP-SMA connectors for corrosion resistance and optimal signal transfer. The solid fiberglass shaft, UV/corrosion-resistant finish, and tight tolerances improve durability and minimize insertion loss. Operating temperature range: -20°C to +80°C. Whether you're using it indoors or outdoors, this antenna delivers consistent performance.
6. BLUETOOTH & WIFI 6 COMPATIBLE The 2.4GHz band serves both WiFi and Bluetooth, so upgrading your antenna also improves Bluetooth connectivity for wireless headsets, keyboards, mice, and game controllers a common pain point for desktop users. Fully compatible with WiFi 6 routers (AX1800, AX3200, AX5400, AX11000) and PCIe WiFi 6/6E network cards.

Tired of weak WiFi signals, dropped connections, and limited range on your router, PCIe network card, or USB adapter? The 2-Pack 10dBi Dual Band High Gain Antenna Set is the solution youve been looking for. With 10dBi high gain performance, these antennas deliver the range, speed, and reliability needed for modern connected homes, gaming setups, and security systems.

Most stock router and PCIe card antennas are limited to 2-3dBi gain, sacrificing range. Upgrading to our 10dBi antennas can increase your effective coverage area by up to 3-5 times, depending on your environment. The 10dBi gain considerably extends effective range and raises link margins for both 2.4GHz and 5GHz bands.

This antenna set works with virtually any device equipped with RP-SMA Female ports (the most common external antenna connector):

WiFi Routers & Access Points:

1. ASUS RT-AC68U, RT-AC86U, RT-AX88U, GT-AX11000, RT-AX1800, RT-AX3200, RT-AX5400, and many more
2. TP-Link Archer series, Deco series (with external antenna ports)
3. Netgear Nighthawk series, Orbi (select models)
4. Linksys WRT series, Velop (select models)

Network Cards & Adapters:

1. WiFi 6 PCIe cards (Intel AX200, AX210, Killer 1675x, TP-Link Archer TX3000E/TX5400E)
2. USB WiFi adapters with external antenna connectors
3. Desktop PC Wireless Network cards

Other Devices:

1. IP security cameras with RP-SMA antenna ports
2. Bluetooth receivers and amplifiers
3. Industrial routers, gateways, and M2M terminals

Connector Compatibility: This antenna uses RP-SMA Male (Center Hole No Center Pin) connectors. Please verify your device has RP-SMA Female (Outer Thread + Center Pin) ports before ordering. If your device has SMA connectors, you will need an adapter.

Physical Compatibility Check (Important!): Before ordering, please check the spacing between antenna ports on your router or PCIe card bracket. These antennas have a wider base than standard stub antennas. If your devices antenna ports are very close together (common on some motherboards), you may need to angle the antennas or verify sufficient clearance. As noted in reviews, if your WiFi headers on your motherboard or adapter are too close together, youre going to struggle to get them on together because theyre relatively large.

5GHz Performance Note: While the 10dBi antenna provides significant 2.4GHz range improvements, 5GHz gains vary by environment and obstacles. In open outdoor areas, users have reported successful 5GHz connections from up to 1.1 km away with perfect signal strength and up to 520 Mbps speeds. However, in dense indoor environments with multiple walls, 5GHz improvements may be less dramatic due to the higher frequencys inherent propagation characteristics.

Antenna Orientation: For omnidirectional antennas, vertical orientation generally provides the best horizontal coverage. The antennas omnidirectional pattern favors horizontal reach while limiting vertical lobing, so placement matters for minimizing obstructions and optimizing line-of-sight sector