Polyken 100D Premium Double-Sided Carpet Tape: 1 in. x 36 yds. (Natural)

Polyken 100D Premium Double-Sided Carpet Tape is a high-quality all-cotton cloth tape coated on both sides (AKA double-coated) with a rubber adhesive. The cloth's high thread count gives added thickness and strength. Double-sided cloth tape is used for carpet hold down and mounting and is designed for residue-free removal. Outperforms paper or film-backed tapes due to superior strength and backing thickness (excellent performance on irregular surfaces). It comes on a heavyweight, silicone-coated, polyethylene film release liner (allows for easy unwind and resists splitting or tearing as it is pulled away from the tape). As a comparison, Polyken 100D does everything Polyken 105C does but can also hold things vertically (like plastic sheeting for asbestos abatement). Low VOC content and can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED.

Uses & Applications

• Used for carpet hold-down for conventions or on aircraft (replaces tack strips).
• For adhering area rugs and carpet runners on to existing carpeting.
• Hanging and seaming polyethylene sheets for construction, abatement and painting; and heavy tarps for outdoor protection.
• Temporary holding applications for industrial use.
• Securing garment to a pallet in lieu of spray adhesive in screen printing.

Polyken 100D arrives at our converter in log roll format, so it is cut and shipped on non-branded plain white cores. This wider log roll size also allows us to offer non-standard widths like 1 inch and 4 inches. Made in the U.
S.

NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i. e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 24mm x 33m. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e. g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.

Technical Information
- Core: 3 inch diameter
- Backing/Carrier: cloth
- Adhesive: rubber
- Release Liner: polyethylene film (LDPE)
- Standards Met: LEED - contributes toward satisfying EQ Credit 4.1
- Thickness: 15 mils (carrier, adhesive, liner) 13 mils (carrier, adhesive) 2 mils (liner)
- Adhesion: 45 ounces per inch (to stainless steel test panel)
- Tensile Strength: 30 pounds per inch (longitudinal)
- Tack: 75 inches (rolling ball)