Hello 
Select address 
Returns
& Orders
Cart
HelloSelect address
AI SparkAI Mode
Menu
Newegg Business
Feedback
Help Center
Your Browsing History
  1. Home
  2. Automotive & Tools
  3. Grounds Maintenance & Outdoor Equipment
  4. Manifolds & Valves
  5. Generic Brand

  6. Item#: 34C-0094-00005

Out of stock
This item is currently out of stock and it may or may not be restocked.
Out of Stock
Sold by Newegg

Shipped by Newegg

Add to Wish List
Shop it at NeweggBusiness.
Shop All Generic Brand Products

Low Pressure Propane Gas Flame Failure Safety Control Valve Kit Fits for Fireplace, Fire Pit, Gas Grill, Heater (3/8Inch Male Flare Swivel)

Be the first to review this product...
  • Specification: Low Working Pressure Max 1/2 PSI (65mbar), Main Control Valve In & Out with 3/8 Male Flare thread (Max BTU rating: 50000).
  • Keep The Thermocoupler to be Heated and Push the Valve around 5-10s Then Release Hand (if Flame stops, Ajust the location of Thermocouple tip)
  • Suitable for Low Pressure Repair Control System for Grill, Fire Pit, Fireplace & Heater (max BTU rating: 50000 working pressure 65mbar)
  • Package Includes: a Control Valve, a Thermocouple with the length of 600mm, a Plastic Black Bakelite Knob.
  • Please make sure that the installation position of each part is accurate when installing.
Overview
Specs
Reviews
avatar

Any questions? Our AI beta will help you find out quickly.

Try me now

Features and further details

Operation Instructions

1). Fix the valve on a plate or board of your grill or fire pit by the head screw and flange.

2). Connect your inlet and outlet hose on inlet and outlet side. (faston it tightly enough in case of gas leakage)

3). Faston the thermocouple nut M*8 on the valve end tightly

4). Connect thermocouple and end thread well

5). Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough.

6). Release your hand and it work properly If when you release hand, gas valve shut off again, Please check

a. If your thermocouple is always be heated on flame

b. If the thermocouple end is well connect with valve

c. If the inlet and outlet side well connect with hose you have

Possible problems occurs during your use:

Reason:

a. The thermocouple head is not heated in right place, please adjust thermocouple tip position.

b. The connection between thermocouple end and valve is not connected tight enough or too tight, please adjust the screw again.

c. Need to push valve first then turn the spindle and hold for few seconds, it cannot stick immediately may need 5-15 Seconds.

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies

Manufacturer Contact Info

LOADING...