? GoTEK 3.5 Inch USB Floopy Disk Drive uses normal USB flash drive as the medium for transfer design.? 1.44MB SFR1M44-U100 USB Emulator equipped with 34pin floppy driver interface 5V DC power supply easy to install.? USB Emulator Capacity -- 1.44MB 2HD
Cylinders: 80
Tracks: 160
Sectors/Track: 18
Bytes/Sector: 512
Data transfer rate: 500 kbps
Encoding method: MFM.? 1000pcs partitions in usb flash drive can be used. This floppy drive simulator is perfect for embroidery machine and industrial control equipment of 1.44MB floppy disk drive? Attention? in? Installation? -- Do not be reverse when installing the cable; The USB drive must be formatted into 1.44M FAT12 format then it could be identified by our GOTEK emulator.? IMPORTANT TIPS -- The default loaded firmware is from the GOTEK manufacturer support 1.44M 34pin - IBM/PC interface the format is DOS/FAT12 and the chip is AT32F415 Cortex-M4 so please make sure your machine could support these important points.? If you would like to use our Gotek floopy emulator on AMIGA you need to change our default firmware to FlashFloppy firmware first.