Out of stock
This item is currently out of stock and it may or may not be restocked.
Sold by Newegg

Shipped by Newegg

Shop it at NeweggBusiness.

Alphacool Core M.2 NVMe PCIe 4.0 Liquid Cooler (13079)

  • Alphacool Core M.2 NVMe PCIe 4.0 Liquid Cooler (13079)
Overview
Specs
Reviews
avatar

Any questions? Our AI beta will help you find out quickly.

SSDs in M. 2 format are now standard PC equipment. The high transfer rates and extremely low access times allow faster and more effective working or gaming on the PC. Alphacool offers the Core M. 2 NVMe PCIe 4.0 Liquid Cooler so that the full performance of the M. 2 NVMe SSD can be used permanently. It is a useful addition to any water cooled system and ensures that the M. 2 SSD memory can unleash its full potential. Why an active M. 2 cooler? Due to their design, M.

2 SSDs are only capable of delivering their maximum performance for a short time. The controller chip heats up extremely quickly and starts to throttle the performance of the M. 2 SSD early on to avoid overheating. Independent tests have shown that during write operations, the transfer rates of uncooled M. 2 SSDs can drop after just 30 seconds. With read processes, the throttling usually occurs a few seconds later. With the Alphacool Core M. 2 NVMe PCIe 4.0 Liquid Cooler, the maximum performance of the SSD can be used over a significantly longer period of time.

This is clearly noticeable during longer read and write processes. MountingThe Core Cooler is mounted in a free PCI Express x4 slot. It is compatible with M. 2 NVMe SSDs that are populated on one or both sides. If the PCB is populated with memory chips on both sides, the 1 mm heat conduction pad is used on both sides. If memory chips are only installed on one side, then the 0.5 mm and 1 mm thermal pads are used on top of each other on the side without chips. Once the top and bottom of the SSD have been fitted with thermal pads, the SSD memory is inserted into the retaining clip of the M.

2 NVMe PCIe 4.0 PCB and mounted on the cooler together with the backplate. The cooler itself can now be integrated into the water loop using the integrated G1/4" connections. Copper instead of aluminium! Alphacool only uses copper in its water coolers.
The reason is simple: copper has almost twice the thermal conductivity of aluminium and is therefore the obviously better choice

Warranty & Returns

Warranty, Returns, And Additional Information

Return Policies

LOADING...