Rythalix Explosion-Proof Safety
The Rythalix Office Chair Gas Cylinder redefines safety standards with industry-first 4-stage pressure control - 37% more stable than conventional 3-stage cylinders. Our gas lift cylinder uses military-grade sealed chambers and thermal expansion buffers to eliminate explosion risks, certified by BIFMA X5.1-2017 safety standards."
2.0mm Reinforced Armor
Forged from 2.0mm aerospace-grade stainless steel (3x thicker than average), the Rythalix gas cylinder withstands 880lbs load capacity through 50,000+ test cycles. The precision-machined surface ensures silent - noise reduced to <20dB, quieter than a wristwatch tick.
3-Second Click Installation
- Align - Match arrow indicators on the gas cylinder and chair base
- Lock - Feel the secure engagement of the SmartLock clip
- Test - Rotate 360° to confirm smooth movement
Butter-Smooth 360° Rotation
Experience zero-resistance movement with our Dual-Raceway Ball Bearings (32 high-carbon steel balls):
? 6x Smoother than plastic bushings
? No wobble at full extension
*Pro Tip: Regular rotation extends chair lifespan by 2-3 years!*"
All-In-One Kit Includes
- 2× Stainless Steel Clamp Shafts
- 2× Reinforced Long Bolts
- 1× Ergonomic L-Wrench
- 1× Work Glove
- Step-by-Step Visual Guide
Works with 98% Office Chairs
- Executive chairs | Gaming chairs | Stools
- Fits cylinders up to 1.1" (28mm) diameter
Built to Last
- 304 Stainless Steel Construction
- Rust-proof & corrosion-resistant
- 3X stronger than plastic removal tools
3-Minute DIY Solution
- No Extra Tools Needed!
- Disassemble stubborn cylinders
- Fixing sinking office chair
Instructions for replacing/disassembling the gas lift cylinder
No need for other tools, use this tool set to disassemble/replace/remove gas cylinders that have been sunk for many years, making disassembly easy and saving you strength and time. For more detailed information, please refer to the manual step-by-step instructions for replacement and disassembly.
Notice(Important):
1. Attach Top Collar:Secure the upper collar with the short screws.Check: The collar should slide smoothly along the cylinder.
2. Lock Bottom Collar:Install the lower collar with the short screws.Check: Tighten until the collar cannot move.
3. Reinforce with Long Screws (Key Step!):Alternately tighten the two long screws(left then right) ? Avoid collar tilting.Why? Prevents tilting and ensures even pressure.
Quick Reminder:
"Top slides, bottom locked, alternate screws to keep it rock-solid!"
Rythalix Explosion-Proof Safety
The Rythalix Office Chair Gas Cylinder redefines safety standards with industry-first 4-stage pressure control - 37% more stable than conventional 3-stage cylinders. Our gas lift cylinder uses military-grade sealed chambers and thermal expansion buffers to eliminate explosion risks, certified by BIFMA X5.1-2017 safety standards."
2.0mm Reinforced Armor
Forged from 2.0mm aerospace-grade stainless steel (3x thicker than average), the Rythalix gas cylinder withstands 880lbs load capacity through 50,000+ test cycles. The precision-machined surface ensures silent - noise reduced to <20dB, quieter than a wristwatch tick.
3-Second Click Installation
- Align - Match arrow indicators on the gas cylinder and chair base
- Lock - Feel the secure engagement of the SmartLock clip
- Test - Rotate 360° to confirm smooth movement
Butter-Smooth 360° Rotation
Experience zero-resistance movement with our Dual-Raceway Ball Bearings (32 high-carbon steel balls):
? 6x Smoother than plastic bushings
? No wobble at full extension
*Pro Tip: Regular rotation extends chair lifespan by 2-3 years!*"
All-In-One Kit Includes
- 2× Stainless Steel Clamp Shafts
- 2× Reinforced Long Bolts
- 1× Ergonomic L-Wrench
- 1× Work Glove
- Step-by-Step Visual Guide
Works with 98% Office Chairs
- Executive chairs | Gaming chairs | Stools
- Fits cylinders up to 1.1" (28mm) diameter
Built to Last
- 304 Stainless Steel Construction
- Rust-proof & corrosion-resistant
- 3X stronger than plastic removal tools
3-Minute DIY Solution
- No Extra Tools Needed!
- Disassemble stubborn cylinders
- Fixing sinking office chair
Instructions for replacing/disassembling the gas lift cylinder
No need for other tools, use this tool set to disassemble/replace/remove gas cylinders that have been sunk for many years, making disassembly easy and saving you strength and time. For more detailed information, please refer to the manual step-by-step instructions for replacement and disassembly.
Notice(Important):
1. Attach Top Collar:Secure the upper collar with the short screws.Check: The collar should slide smoothly along the cylinder.
2. Lock Bottom Collar:Install the lower collar with the short screws.Check: Tighten until the collar cannot move.
3. Reinforce with Long Screws (Key Step!):Alternately tighten the two long screws(left then right) ? Avoid collar tilting.Why? Prevents tilting and ensures even pressure.
Quick Reminder:
"Top slides, bottom locked, alternate screws to keep it rock-solid!"