How to install: 1. 1. Temporarily fix this product to the vehicle and mark the cutting position. 2. Remove this product and cut it with a cutter etc. according to the marking. 3. 3. Cleanly removes oil, dirt, dust, etc. from the mounting surface on the body side. 4. Peel off the release paper from the double-sided tape on the back of the product, warm the double-sided tape and the mounting surface sufficiently, and then lightly attach it from the edge so that it does not float. When installing, check that the entire product is not distorted. 5. After completing the installation, check that there is no rattling or floating.