Question 1

Can you turn fans off with this as well?

Accepted Answer

Yes, each fan has an individual control knob which can be used to shut fans off.  I have several fans that I mounted in the cabinet that I am currently not using. So I use this feature to make them dormant

Question 2

By RGB does that mean you can change the color of the display or does this actually have full support for setting the color of RGB fans ?

Accepted Answer

You can change the color of the displat they are only 3 pin connectors for fans.  So no led control for fans.

Question 3

can i power up this whit usb adapter? i know that 4pin but i dont remember that bigger cable name but i know there was usb adapter whit it i realy need this one for my project :I

Accepted Answer

I don't think you can, usb doesn't supply enough power to power the rest of the fans. It pulls it's power from a 4 pin molex connector coming off the power supply.

Question 4

I'm at a loss where to put the diod temperature cables.   Can anyone suggest?  the directions on this device seem lacking in that regard.

Accepted Answer

Anywhere really. I have mine in all the heat sinks in my computer, two in the graphic card, one in the cpu cooler fins, one in the south bridge heat sink, one in the ram heat sink and one just floating in the case for intake air temp.

Question 5

Can this controller control the RPM of 3 pin fans by RPM or does it increase the voltage in order to increase the RPM's? And if it increases just the voltage can it still read RPM's or do you have to have 4 pin fans in order to get the full read of everything?

Accepted Answer

Its by voltage, however a 3 pin works fine. Unless it has leds. I have 2 corsair fans with 3 pin connectors and it controls voltage in order to read the rpm. The only con I have is that there is no automatic setting. It comes with 6 controllers and 6 temp diods. Over all. The colors are legit. You can brighten them aswell.

Question 6

Are the fan connectors 3 pin or 4 pin?

Accepted Answer

3-pin but the connector has space for up to 4-pin (on a 4-pin fan 1 -pin will not be connected - in other words it's a 4-pin fan connector with only 3 pins

Question 7

is there a max wattage per channel on this controller?

Accepted Answer

Yes 30 watts per channel

Question 8

Talks about "Thermal Dynamics Monitoring Easily Switch between F / C"
It monitors the fans heat or the air near the fan or what exactly is it monitoring? How can I get it to monitor ?

Accepted Answer

riley.. don't know if this has been answered yet or not... what this controller does is that it will monitor the temp for the location of the sensor- you determine where and how to place them.. i've had a bitfenix recon and a nzxt controller and this one works better and is simpler as well.. there is some wire routing to do but it's not difficult.. this one will work with almost any fan as it uses regulated voltage to control fan speed.. i have mine hooked up to a total of 8 fans in a corsair 900d case ( each of two of the controls runs 2 fans each).. works well and i think the mechanical 'pots' work better than the digital touch screen ones...

Question 9

Does anyone know how much current this would draw?

Accepted Answer

Voltage? 12v. Amperage? thats a variable thats constantly going to change depending on how fast the fans are running, and how many of them you have plugged in. if you're worrying about melting or overheating, its not an issue. ive been running mine for awhile now and it works fantastically. just plug it into a 4-pin molex and boom, you're ready to rock!

Question 10

can this be used with rgb fans and still be able to control speed and color?

Accepted Answer

It only has one power source, so unless your fans have a separate power input for just the LEDs, then I'm guessing this fan controller will dim the LED lights of the fan when you throttle the RPMs of the fans.  This unit changes colors on the display but has no control over any kind of fancy fan with color changing LED lights.

Brand	Thermaltake
Model	AC-024-BN1NAN-A1

Compatibility	5.25" Drive Bay
Types	Switch Fan Controller with LCD Display
Material	Plastic
Dimensions	90.00 x 150.00 x 43.00mm

Best Sellers

Meet Your Seller

Thermaltake Commander F6 RGB LCD 6 Channel Single 5.25” Bay Fan Controller AC-024-BN1NAN-A1

Learn more about the Thermaltake AC-024-BN1NAN-A1

Customer Reviews of the Thermaltake AC-024-BN1NAN-A1

Warranty & Returns

Warranty, Returns, And Additional Information

Warranty

Return Policies

Manufacturer Contact Info

Item#: 9SIAD6HKH86660